Among Hysters top safety concerns is safety. It is why they offer many pieces of optional safety equipment that can be included to either the work site or the machine itself. Following the standards of OSHA, Hyster makes head and work lamps along with both visible and audible warning devices.
The only warning device required on the forklift according to ASME B56.1 and OSHA regulations is the steering wheel horn. The horn is basic on all types of lift trucks. Even though forklifts are not required to have both visible or audible warning devices, there are a few cases where optional warning devices could be appropriate. These factors are unique to every work site or work place and each and every condition must be considered individually.
Back-up alarms or motion alarms are the most common safety devices. The noise produced by these alarms are the main factor to consider. First of all, the audible device should be able to be distinguished from other kinds of noises in the work site and the sound must be extremely loud to be heard in the work location, even if other kinds of machinery could be functioning. The ability for workers to hear alarms and know where the sound is originating from can be compromised if employees are wearing hearing protection devices. If the alarms are too offensive or disruptive to workers, nearby companies, or nearby houses, alarms might have to be disabled. If sound needs to be disabled, this must be able to happen readily. Rules must also be followed so as to make sure that the levels of noise do not go beyond OSHA noise limitations.
For visible safety devices, most frequently rotating, flashing or strobe lights, numerous factors must be considered and thought should be put into whether visible safety devices might be more suitable than audible devices. Workplace lighting, presence of reflective surfaces, and driver distraction are all main priorities to consider to ensure that safety devices do not pose a danger to operators or other employees and are effective. Safety light colours should be different from other lights and background surfaces that are in the work place. Safety device placement are really important. Lights must be able to clear any overhead obstacles. Light positioning should not cause the lights to reflect or shine into the driver's eyes, but shielding of the lights must not excessively block the light's visibility to pedestrians.
To suit many application requirements, Hyster has a variety of optional lights which comprise halogen lights and weather-resistant LED. These lights could hold up through shock and vibration as well. When it comes to head lamps and work lamps, OSHA has set standards to make working at night or in dark work spaces safer. Directional lighting is needed if the lighting on the forklift produces less than 2 lumens per square foot. Hyster has lots of choices that would truly help increase visibility in low-light conditions.