Reach Forklifts
In the majority of distribution facilities or warehouse settings, overall space is typically limited. If you could get a machinery to use in smaller aisles and spaces, the more storage space a company would be able manage. For this reason, specialized machine has been intended to be used in very narrow aisles in order to maximize efficiency and space.
Reach Trucks
The specialized reach forklift has a mast that extends away from the forklifts body. Normally, it is attached with a scissor mechanism. When the scissor is compacted or drawn in, the forklift becomes a lot narrower compared to the typical forklift.
Operator Position
Reach trucks are designed so the driver can stand while in operation of the machinery. This is a contrast to the typical forklift where the driver is usually sitting. The standing operation area reduces the amount of room needed for the compartment of the operator, allowing the machine to accomplish an even smaller profile overall.
Space Saving
Aisle-ways could be made as narrow as 7 feet with a reach truck. Most regular lift trucks need a minimum aisle space of around 11 feet; thus, using a reach truck provides about a savings of 5 feet per aisle. When the warehouse is leased by the square foot basis, this is a significant amount of space.
Unique Controls
Usually, a reach truck is steered using a rotating lever located beside the driver on a platform. There is one more lever utilized to control reverse and forward, the mast as well as for extending the mast. These controls are quite different compared to standard forklift controls.
Load Capacity
Normally, the load capacity for a reach truck is less than that of a regular lift truck, depending on the model. This is largely because of the narrow design of the machinery, that could lead to a really high center of gravity. When the load is raised and the mast is extended fully, this is actually true.